You will learn how to Make Self Container Watering from a 5 Gallon Water Cooler Bottle and a Rope, step by step.
The strings will irrigate the transfer of water from the Reservoir to the Substrate.
Let’s make life together more sustainable! recycle, reuse, make conscious discards!
To get started We will need:
1 gallon of water of 20 Liters
1 Tin Welder to drill holes
1 Hot air blower, 1 pen
Barbed Wire or Nylon Rope, you can also use
of cotton, knit etc., the important thing is to be a material absorb
the water. It’s a saw
Benefits! Autonomy of Irrigation for 5 days, is totally closed the entrance of Insects causing Disease, and Ensures Water Economy.
Now I’m going to cut the gallon to this extent, here’s going to be the water reservoir.
And that will be the Container garden, After cutting sanding the burrs.
Drill holes for water drainage. divide the diameter by 4.
To make the 4 openings of the lower vessels that will be 8 cm each.
With the blower, warm up to make the vents, Insert a Glass Bottle to open, hold for a few minutes until cool.
Sanding by removing the burrs to finish,
A plastic pipe of 20 mm by 450 mm, which will be the reservoir water replenisher.
Drill and place plastic pipe, also drill holes at the bottom for better water flow.
With a smaller plastic bottle, cut off the top and drill holes to pass the strings.
I’m using bits of brick for drainage. Place in Container.
Now put the Substrate, I’ll leave here a Recipe that is Excellent:
1 part Worm Humus
1 Curral manure,
1 Poultry Poultry,
1 Beaver Tortilla
1/4 Bone Meal!
Now I will refuel the water tank has a capacity of 5 liters.
I’ll plant Regina Lettuce seeds. 2 to 3 seeds in each place.
Do the watering as the seeds will enter Germination and the Substrate must be well moist.
See now the development of lettuces.
Here with 5 days are already germinating.
Today is 30 days, see the result!
Thank you friends
to view the Movie